Sharpe Mixer Logo Image of Hayward Gordon Sharpe Mixer Mixing Impellers

 

SHARPE IMPELLERS

mixer



Sold In Canada Sold In United States Sold internationaly

 

No single impeller can perform well in all applications. Sharpe Mixers provides a variety of
industry standard and specialized proprietary impeller designs that are optimized for specific
mixing applications.

  • AFT-455 Conventional 45-degree flat blade axial flow turbine impellers create high turbulence in lower viscosity and better shear in higher viscosity liquids than more efficient hydrofoil impellers. Generates good axial flow in higher viscosity liquids (NRe< 200).
  • FBT-700 Flat blade radial flow impellers create high flow and shear rates, but draw more power than pitched blade impellers. Best for dis­ persion at high tip speeds (>30 fps), and blending immiscible fluids. Also used as "tickler" impellers to mix low liquid levels.
  • CBD-730 The "Smith" radial flow disc impeller provides necessary shear for good gas dispersion, and the disc design provides better gas hold-up and reduces short circuiting. The cupped blades create larger bubble surface areas to improve gas transfer.
  • HYF- 218 "Hyflo" hydrofoil impellers generate greater flow for less power. The HYF-218 is best for low viscosity products. Provides double the flow of pitched blade turbines at the same power. Low blade angle and hydrofoil blade shape reduce shear rates.
  • HSD-800 The"Cowles" high shear disc impeller cre­ates high-shear to prevent clumping, wet out powders, reduce particle size and emulsify. Best when operating at a high speed. Can be used in conjunction with an axial impeller to provide tank circulation and high shear.
  • HYF-518 The wide blade "Hyflo" high-efficiency hydrofoil is best used on medium viscosity (NRe< 500) products. Provides equal flow at half the power of common pitched blade turbines. The high-solidity design is also optimum for gas-handling applications.
  • ANC-101 "Anchor" impellers are used to mix higher viscosity products (NRe<200). Add scraper blades to clean vessel walls , or a separate high-shear mixer to improve flow/shear.
  • HLX-102 Single and double helix impellers are best for blending viscous liquids (NRe< 50). Can also be paired with anchor, auger, axial flow and/or scraper blades.
  • Split Hub Allows easy installation, positioning and removal

Industries Served

Swipe

Industrial

Swipe

Sanitary

Swipe

Municipal

Overview

Sharpe proprietary mixing impellers have been designed from thousands of parameters to arrive at the optimum solution. Extensive application knowledge, laboratory testing, computer analysis and product development ensure that our impeller designs are optimized for Liquid/Liquid, liquid/solid and gas/liquid applications.

 

Benefits

  • Split Hub Design
  • Folding Blade impeller
  • Easy Clean split Block

 

Overview

The food & beverage industry brings application challenges for sanitation and ease of cleaning. Our mixers incorporate designs to meet FDA, USDA and 3A standards. The pharmaceutical and BioTech brings cleanability to another level. Our special designs are available with polished or electro polished finishes to 5Ra

 

Benefits

  • Exotic alloys
  • Polishing to meet regulations

 

Overview

Sharpe combines advanced impeller technology and conservatively designed drives to provide cost effective solutions for chemical preparation, equalization/neutralization, flocculation and sludge blending. Our Ragless impeller design is ideal for tough applications

 

Benefits

  • Low initial cost
  • Non Ragging design
  • High Efficiency Hydrofoild

 

 

Copyright Hayward Gordon 2018 | All rights reserved | Privacy Policy
Proudly powered by Webrunner